Darkglaas KAAMOS

Unleashing lows with flexible routing

Kaamos's wizardry lies in its flexibility. With real-time routing controls shaping the signal path, effects can be stacked in series for deep saturation or run in parallel for complex textures. Tone can also be manipulated through a movable effects loop that can be placed in 6 different positions. A dedicated sub-octave output unlocks inventive possibilities for multi-amp setups, and intuitive controls ensure complete sound control.

From pristine lows to distorted rage, the Kaamos is engineered to be the centerpiece of any rig. Its sleek design, premium construction, and unmatched versatility make it the foremost tool for bassists who are in demand of control and tone versatility.

Controls

Blend: Adjusts the drive blend (Press to select the loop position)

Tone: Adjusts the drive tone (Press to select between cabsim and DI for the XLR out)

Drive: Adjusts the amount of distortion in the drive circuit

Drive mod: Adjusts the blend between two distinct drive circuits

Clean level: Adjusts the clean signal amount in the octaver circuit (Press to select the type of octaver)

Octave level: Adjusts the low octave signal amount in the octaver circuit (Press to select between parallel or series effect positioning)

Octave filter: Adjusts the lowpass filter frequency of the low octave

I/Os

Input: Connect your instrument or output from your pedal board to the .” mono jack.

9V DC: Only use a regulated 9V DC adapter with a center-negative plug

Sub: This .” Sub output jack provides only the low octave signal when the octaver is activated

Output: Connect from the .” Output jack to the input of your amplifier or another effects pedal.

Send: Use this .” to send the effects loop signal to your external effects

Return: Connect the output of the last pedal in you effects loop into this .” jack

Direct output: Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.

Ground lift: Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the .” output.

Dimensions

Width: 125 mm / 4,92”

Length: 96 mm/ 3,77”

Height: 57 mm / 2,24”

Weight: 430 g / 0,94”